Plant Closed - Surplus to the Ongoing Needs of
FORUM ENERGY TECHNOLOGIES
Hydraulic Torque & CNC Machine Shop
Webcast - Live Online Auction
13219 Stafford Road, Suite A – Missouri City, TX 77489
Wednesday, September 30th @ 10:00 A.M. CDT
Tuesday, September 29th from 8:00 – 4:00 P.M. CDT
SLD Hydraulic Torque Machines, Okuma, HAAS, & HURCO CNC Machining, Fabricating & Support Equipment Including:
- Hydraulic Make-Up/Break-Out Torque Machines:
-
SLD Torquemaster Hydraulic Make-Up
& Break-Out Machine with 2-3/8”-10” Capacity, mfg.2015
-
SLD Torquemaster Hydraulic Make-Up
& Break-Out Machine, mfg.2017
- CNC Multitasking Center:
-
OKUMA Multus B400W x 2000II Big Bore CNC Mulit-Tasking Center with Dual 15” Chucks, Approx. 80”
Centers, 40 Position ATC, Programmable Steady Rests,
mfg.2012
- CNC Turning Centers:
-
OKUMA Genos L400E CNC Turning
Center with 10” 3-Jaw Chuck, mfg.2012
-
HURCO TM18 CNC Turning Center with
18” 3-Jaw Chuck, mfg.2011
- CNC Lathe:
-
HAAS TL-3 CNC Lathe with 12” 3-Jaw
Chuck, mfg.2012
- Big Thru-Hole Lathe & CNC Chucker:
-
ZMM-BULGARIA C10T.12 Oil Country
Engine Lathe with 12-1/2” Bore,10’ Center Distance, 25”
F&R Chucks, Taper, mfg.2012
-
KINGSTON CP1000 Flatbed CNC Chucker
with 7” Bore, 25” 3-Jaw Double Chuck, mfg.2011
- CNC Vertical Machining Centers:
-
HURCO VMX50 Vertical Machining
Center with 12” 4th Axis Rotary Table, mfg.2012
-
HURCO VM30i Vertical Machining
Center, mfg.2015
|
-
HURCO VM30 Vertical Machining Center
with 8-1/2” 4th Axis Rotary Table, mfg.2014
-
HURCO VM10 Vertical Machining Center,
mfg.2012
-
Horizontal Bandsaw:
-
COSEN C-460NC Horizontal Bandsaw with
PLC Control, mfg.2012
-
Inspection Equipment:
-
ZEISS ACCURA Bridge Type CMM with 50” x
65” Capacity, VAST XT RDS-CAA Probe, Charger & Tilt,
mfg.2012
-
MITUTOYO PH-A14 CMM with QM-Data 200
-
MITUTOYO LH-600 Electric Height Gage
-
MITUTOYO CV-600A Hardness Tester
-
Blast Room:
-
EMPIRE Abrasive Equipment Co. PR 10
15-10 Blast Room with 15'L x 10'W x 9'H, Reclaim Sand
Blast Gen, Hood, Pot & Double Doors
-
Fabrication, Machine Shop & Support Equipment:
-
(2)
MAXIEM Waterjet 1515 (OMAX) with 5’
x 5’ Capacity Table, mfg.2013
-
WILLIS 5000VS Vertical Milling Machine
with 12” x 48” Power Feed Table & OP 200 DRO
-
G&L BICKFORD Chipmaster 3’ x 9’ Radial
Arm Drill with 20” Rotary Tilt Table
-
TELESIS Pinstamp TMP 1700 Marking
System
-
TONS of Tooling, Jib Cranes, Hand
Tools, Inspection Tools, Toolboxes, Vidmar & Flammable
Cabinets, (2) Acron Tables, Steel Tables, Office
Furniture, etc.
-
Plus More!!
|
Plant Closed
EQUIPMENT MANUFACTURER
Late Model NORDSON Powder Paint System, Machine Shop, Air Compressors & Warehouse
Webcast - Live Online Auction
709 Powerhouse Rd – Independence, VA 24348
Wednesday, October 7th @ 10:00 A.M. EDT
Tuesday, October 6th from 8:00 – 4:00 P.M. EDT
Late Model NORDSON Powder Paint System, Machine Shop, Air Compressors & Warehouse Including:
|
|
-
DAKE Johnson V-24 Vertical Bandsaw,
Late Model
-
SOUTHBEND B-60 Heavy Duty Geared
Head Drill Press with 2-Axis Adjustable Table
-
LEBLOND REGAL Servo Shift 60”
Engine Lathe
-
CLAUSING COLCHESTER Engine Lathe
-
BRIDGEPORT & EXCELL-O Variable
Speed Milling Machines with D.R.O., Late Model
-
SUPERMAX Universal Vertical /
Horizontal Milling Machines with D.R.O.
-
KMT C360 SA Cold Saw, Late Model
-
DURA-PRESS Force 10 Elecdraulic
H-Frame Press
- Weld Area Including: Nice 4’ x 8’ Acorn Table, Bar
Stock & Racks, (3) Miller Welders, Etc.
-
TOYOTA, CROWN, CATERPILLAR, HYSTER
50 Forklifts, Digital Floor Scales, Huge Assortment:
100’s Sections Heavy Duty Tear Drop Pallet Racking, Box
Truck
- Plus Much More!!
|
Equipment Surplus to the Continuing Operations of
HYPRO INC.
Mori Seiki, Doosan, Niigata, Fuji, Mazak CNC Machining and CMM’s
Webcast - Live Online Auction
Cedar Falls, IA
Wednesday, October 28th @ 10:00 A.M. CDT
Monday, October 26th - Tuesday, October 27th from 8:00 A.M. - 4:00 P.M. CDT
Mori Seiki, Doosan, Niigata, Fuji, Mazak CNC Machining and CMM’s Including:
- (2) TOYODA FMS LINES INCLUDING:
-
FMS TOYODA Machining Line with (4)
FH-550R Machining Centers & 16 Position Pallet
System
-
FMS TOYODA Machining System with
(2) FA450III & Machining Controls & 12 Position Pallet
System
- (40+) HORIZONTAL MACHINING CENTERS
INCLUDING:
- (3)
MAZAK
Nexus 6800II 4-Axis CNC Horizontal Centers, mfg.2012
- (5)
NIIGATA
SPN701 4-Axis CNC Horizontal Machining Centers with
24.8” x 24.8” Pallets, mfg. to 2009
-
MORI SEIKI NHX4000 CNC Machining Center
with 15.7” x 15.7” Pallets, mfg.2012
- (3)
MORI SEIKI
NH5000 CNC Horizontal Machining Centers with 19.7” x
19.7” Pallets, mfg.2002-2003
- (3)
MORI SEIKI
NH4000DCG 4-Axis CNC Horizontal Machining Centers
with 15.7” x 15.7” Pallets, mfg. to 2011
- (2)
NIIGATA
HN100D 4-Axis CNC Horizontal Machining Centers with
39.37” x 39.37” Pallets, mfg. 2008-2012
- (5)
NIIGATA
HN80C/D CNC Horizontal Machining Centers with 31.5”
x 31.5” Pallets, mfg. to 2008
-
DOOSAN H100 Horizontal Machining Center
with 39.4” x 39.4” Pallets, mfg.2007
- (2)
DOOSAN
HM5000 4-Axis Horizontal Machining Centers with
19.69” x 19.69” Pallets, mfg.2010
-
KITAMURA HX630i CNC Horizontal
Machining Center with 24.75” x 24.75” Pallets,
FANUC
16 iMB
- (19)
MORI SEIKI
MH-630, MH-500, MH-633 & MH63 Horizontal Machining
Centers
- CNC VERTICAL MACHINING & TURNING CENTERS
INCLUDING:
-
MAZAK Nexus 700D -II 4-Axis CNC
Vertical Machining Center, mfg.2013
-
DOOSAN DNM500 Vertical Machining Center,
mfg.2010
|
- (3)
MORI SEIKI
NLX 2500/750 CNC Turning Centers, mfg.2014
-
MORI SEIKI SL250 & SL250B CNC Turning
Centers
- Other
OKUMA CNC Turning Centers
-
TSUGAMI BS20IIB & CITIZEN
B12 CNC Swiss Turning Centers, mfg. to 2004
- (2)
FUGI
ANW-4100 Dual Spindle CNC Lathes with Gantry Loaders,
mfg.2008 & 2012
-
OKUMA & HOWA 2SP-35HG Dual Spindle CNC
Lathe with Gantry Load, mfg.2006
- (2)
OKUMA
V80 & V60 CNC Vertical Turning Centers, mfg. to 2010
-
OKUMA & HOWA 2SP-V55 CNC Dual Spindle
Vertical Turning Center with (2) 15” Chucks,
FANUC
18i-T
- MANIPULATING ROBOTS INCLUDING:
- (5)
FANUC
CNC Robots, mfg. to 2013
- CNC GRINDERS INCLUDING:
-
C&B MACHINERY CNC Double Disc Grinder,
mfg.2013
- (3)
MITSUBISHI
PD32-B50 CNC Cylindrical Grinders, mfg.2013
-
ERWIN JUNKER & W&S CNC Angle Head
Cylindrical Grinders
- OTHER MACHINERY INCLUDING:
-
RADYNE 100KW Heat Treat System
-
AJAX Magnethermic Induction Scanner &
Heat Threat System
-
AC MARAND 350 Spline Roller
-
DAITO & KYSOR JOHNSON Horizontal
Bandsaws
- Numerous Stainless-Steel Bolt Feed & Stand-Up Parts
Washers
-
HOFMAN & BALANCESTAR CNC Vertical
Balancers
-
SUNNEN Hones
- (3)
LK
Coordinate Measuring Machines as New as 2015
- (3)
QUINCY
Air Compressors, 75HP – 125HP, mfg. to 2017
- (8)
GORBEL
Free Standing Crane Systems, Jib Cranes, Gantry &
Bridge Cranes
- Huge Assortment of Toolroom
VIDMAR Cabinets, Perishable
Tooling, #50 Taper Toolholders, Support Machinery &
Equipment, Etc.
- Plus Much More!!
|
