• Rowe Model 10050-DSL 12.000lb Hydraulic Uncoiler with Coil Car, 50" Width, Hold Down Arm, Brake & Control, sn:27053
• Memco Model M150 52" Hydraulic Embosser with Manual / Auto Mode, Variable Speeds, sn:58-00
• Rowe Model VFT-4-50 50" Straightener with 7 to 100 FPM, Edge Trimming & Scrap, sn:27055
• Herr-Voss Model LH 66/1.750-19/7 4H 60" Leveler Model Keystone Leveler with .024 Minimum Gauge - .125 Maximum Gauge x 60" Capacity, 0-100 FPM Speed, Controls, sn:30000-1
• Plastic Self-Adhesive Applicator with Heat Element
  Wysong 14 GA x 52" Shear Model 1452-RKB with Hold Downs, Controls, sn:P95-113 (Rowe Control sn:27061)
• Automated Discharge, Stacker, Counters & Variable Speed Line Control Station

• Spindle Speed Range: 6-800 RPM
• Driving Power of HC Brushless Motor: 74 KW
• Maximum Torque: 14,000 NM
• Spindle Hole: 105 MM
• Chuck Diameter: 600 MM
• Bed: 520 MM

• Maximum Rated Cutting Capacity: ½"
• Pallet Size: (2) 5' x 10'
• CNC Control: Fanuc Series 160i-LB
• Resonator: Fanuc C2000i-Model B

• 42” x 34” Auto Feed Table
  12” 3-Jaw Chuck with Variable Speed Drive for Rounds
  2-Axis Movement
  1-1/2” x 278” Diamond Blade

• Spindle Diameter: 6"
• Spindle Taper: #50
• Vertical Headstock Travel, Y-Axis: 108"
• Column Travel, X-Axis: 288"
• Spindle Travel, Z-Axis: 48"
• Spindle Speeds, Variable: 25-1120 RPM
• Feeds, X & Y Axes: .1-300 IPM
• Feeds, Z-Axis: .1-200 IPM
• Feeds, W-Axis: 1-120 IPM
• Rapid Traverse: 320 IPM
• G&L ROTARY TABLE ON INFEEDING SLIDES: Age: 2001
• Rotary Table Size: 48" x 72"
• Work Height: 11.75"
• Number of T-Slots: 6
• Distance Between T-Slot Centers: 8"
• Table Weight Capacity: 25,000 LBS
• Shot Pin Locations: 4 x 90 Degrees
• Clamping: Air
• Infeed of Tables: 59"

Giddings & Lewis 8000M CNC Control (New 2002), 40 Station Automatic Tool Changer, Power Draw Bar, Flood & Mist Coolant, Hardened Runway Ways, Roll-Up Way Covers for Runway, Double Anti-Backlash Rack and Pinion on X Axis, Lubricool System, 3-Way Column, 40 HP Spindle Drive 460/3/60 Cycle, FACING HEAD SHOWN MOUNTED TO MACHINE NOT AVAILABLE

F.O.B.: Lester, PA

• Chuck Diameter 10"
• Max. Swing 20.4"
• Max. Turning Length 41"
• Spindle Thru Hole 3"
• Spindle Speeds to 4000 RPM

12 Station Turrets* Tool Presetter* Chip Conveyor* Fanuc Series Oi-TD CNC Control

F.O.B.: Indian Trail, NC